Our wide range of products are developed for maximum life based on specially formulated compounds . The highly skilled workforce and world class manufacturing facilities only adds impetus to our brand name.
The applications where our belts are used include
» Quarries and sandpits (lump sizes more than 400mm)
» Thermal Power stations (Coal and Ash)
» Cement Works (run of Quarry , Cold clinker)
» Fertilizer and Chemical Plants (Non corrosive products)
» Coal Mines (Ore , Coke Additions)
» Steel Plants (Ore , Coke , Additions)
» Paper Mills (Wood , Edge trimmings)
» Salt Works
» Sugar Mills (Beets , Cassettes)
» Glass Works (raw materials , Cullet)
» Thermal Power stations (Coal and Ash)
» Cement Works (run of Quarry , Cold clinker)
» Fertilizer and Chemical Plants (Non corrosive products)
» Coal Mines (Ore , Coke Additions)
» Steel Plants (Ore , Coke , Additions)
» Paper Mills (Wood , Edge trimmings)
» Salt Works
» Sugar Mills (Beets , Cassettes)
» Glass Works (raw materials , Cullet)
Product Features and Profile of SEMPERTRANS NIRLON Conveyor Belts
Belt Width - 500 mm to 1600 mm
Belt Length - 50 metres to 350 metres in a single Roll Length ( maximum diameter of roll is 2.8 mtrs)
Carcass Construction - Carcass consists of Dipped Synthetic Reinforced fabric based on NYLON / NYLON (NN) or POLYESTER / NYLON (EP).
Cover Thickness - Varies from 1mm to 20mm depending on the belt specifications.
Belt Length - 50 metres to 350 metres in a single Roll Length ( maximum diameter of roll is 2.8 mtrs)
Carcass Construction - Carcass consists of Dipped Synthetic Reinforced fabric based on NYLON / NYLON (NN) or POLYESTER / NYLON (EP).
Cover Thickness - Varies from 1mm to 20mm depending on the belt specifications.
Advantages of SEMPERTRNS NIRLON brand of Conveyor Belts include
Higher Tensile Strength and Good abrasion resistance to withstand higher wear rate which helps to carry highly abrasive and sharp materials. The special silica based Synthetic Rubber Formulation ensures a very good cut growth resistance to the cover.
Low Elongation: Our in house availability of fabric combined state of the art post tension device helps us to restrict the elongation to the required minimum.
Good Impact resistance: Even though it is highly recommended to use a BREAKER Ply where the impact of falling material is high, our special weaving techniques employed for fabrics ensure a very good impact resistance for the belt.
Moisture resistance: The special compounds applied to the edges of the CUT EDGE belts ensures that moisture does not effect the belts in any severe climatic conditions.
Higher Weft Strength: A very high weft strength much above the specified norms allows a very good splicing including the use of mechanical fasteners.
Higher Adhesion: Dipping of the Fabric in Rubber solution before processing which is speciality of only SEMPERTRANS NIRLON ensures a higher level of adhesion enhancing the life of the belt by many miles
Low Elongation: Our in house availability of fabric combined state of the art post tension device helps us to restrict the elongation to the required minimum.
Good Impact resistance: Even though it is highly recommended to use a BREAKER Ply where the impact of falling material is high, our special weaving techniques employed for fabrics ensure a very good impact resistance for the belt.
Moisture resistance: The special compounds applied to the edges of the CUT EDGE belts ensures that moisture does not effect the belts in any severe climatic conditions.
Higher Weft Strength: A very high weft strength much above the specified norms allows a very good splicing including the use of mechanical fasteners.
Higher Adhesion: Dipping of the Fabric in Rubber solution before processing which is speciality of only SEMPERTRANS NIRLON ensures a higher level of adhesion enhancing the life of the belt by many miles